AME MM-2 설치 매뉴얼 - 페이지 4
{카테고리_이름} AME MM-2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AME MM-2 18 페이지.
AME MM-2에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
Software
Switch
1
2
3
4
5*
Shock Sensor Main Trigger Sensitivity
LED will flash according to the current setting when
Press buttons 1 and 2 together to enter the setting.
When required sensitivity is set press buttons 1 and 2
once again to confirm and exit the setting.
Shock Sensor will be in a test mode when this
switch is selected to allow testing sensitivity.
6*
Shock Sensor Pre Warn Trigger Sensitivity
LED will flash according to the current setting when
Press buttons 1 and 2 together to enter the setting.
When required sensitivity is set press buttons 1 and 2
once again to confirm and exit the setting.
Shock Sensor will be in a test mode when this
switch is selected to allow testing sensitivity.
7**
*NOTE:
1. Once you reach the highest or the least sensitivity, no further siren beeps will confirm any further pressings of
the transmitter button.
2. The Pre Warn Trigger Sensitivity cannot be set less than the Main Trigger Sensitivity.
3. If you enter the setting, and do not press the transmitter button, the system will exit the setting in 1 minute
automatically and will stay with the sensitivity has been set before.
**NOTE: If the Pre Warn option is set and alarm system is armed with the door open (interior light switched on) the
input will be enabled after 15 seconds of a door being closed (interior light is turned off).
Function
Dome Light Cars
Door (+/ ) Input Polarity
CDL Locking Time
Twenty Second Locking
1 = Minimum Sensitivity
9= Maximum Sensitivity
the switch is selected.
1 = Minimum Sensitivity
9 = Maximum Sensitivity
the switch is selected.
Trunk ( )/Pre Warn( ) Input
Default Setting
Option 1
OFF
ON
Negative
Positive
0.8s
0.8s
OFF
ON
5
Up
(A beep will
confirm each
pressing)
5
Up
(A beep will
confirm each
pressing)
Trunk ( )
Trunk ( )
AME MM 2 Car Alarm System
Option 2
OFF
Negative
4s
OFF
Down
(A beep will
confirm each
pressing)
Down
(A beep will
confirm each
pressing)
Pre Warn
Installation manual
3