AME Fasy-Flate 24868 매뉴얼 - 페이지 6
{카테고리_이름} AME Fasy-Flate 24868에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AME Fasy-Flate 24868 12 페이지. Digital automatic tire inflator (portable)
페이지 인쇄LCD Display
SET OPS
1. Unit display
2. Pressure display
3. Function select display
4. Working indicator
Function and Operation
This device includes the OPS
(Over Pressure Setting) function used to
inflate and seat tires on the rim.
Operation
1. Unit select
Device has four units can be chosen by the
user which is kpa-psi-bar-kg/cm2.
Unit set here will become default unit for
following usage, do not need to set unit
each time.
1.1. Press (SET), (SET) will be shown
on the LCD screen, and the unit
will be flashing.
1.2. Press (+) or (-) to choose the
unit.
1.3. Press (SET) to confirm.
6
2. Set OPS (Over Pressure Setting)
KPA
BAR
PSI
KGF
3. Manual inflation
If tire pressure is lower than 3 p.s.i. or 0.2
bar, the device will not start automatically.
4. Set programmable buttons
(P1) initial value is 15 p.s.i. /1 bar, (P2)
initial value is 30 p.s.i. /2.1 bar. The preset
pressure value can be reset by the user,
setting it here will save it for following
usage. But it reverts to the initial value
after a unit set change.
1. Press (P1) or (P2), (P1) preset value or
2. Press (+) or (-) to choose preset
3. Press (SET) to confirm.
2.1. Press (SET) once, (SET) and (OPS)
will be shown on the LCD screen,
(OPS) will be flashing.
2.2. Press (+) or (-) to choose the
OPS value.
2.3. Press (SET) to confirm. If
OPS value is not zero, (OPS) will
be displayed at the LCD screen.
3.1. Press (SET) twice, the
current pressure will be shown
on the LCD screen.
3.2. Press (+) to start manually.
(P2) preset value will be shown on the
LCD screen.
pressure value.