AME Intl. Combi 11010 사용 설명서 - 페이지 4

{카테고리_이름} AME Intl. Combi 11010에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AME Intl. Combi 11010 8 페이지. Tire bead breaker

Activating the Bead Breaker

CAUTION

The bead breaker uses a long stroke and high force. Be Careful not to dam-

age or bend rim parts, such as flange But weld, when using the bead

breaker.

1. Run the air hydraulic pump so that the clamping jaw begins to tighten against

the rim. (See Fig. 3) Make sure the wedge –

shaped teeth are placed well into the tire bead and against the rim flange.

NOTE: To grab the rim flange evenly, you may have to try Several times.

Do not force the bead breaker when grabbing the flange.

2. Continue to apply hydraulic pressure until the bead breaking ram ex-

tends about ¼ inch [6,35 mm] from the bead breaker. (See Fig 4.)

Maintain the

bead breaker, so that it is nearly perpendicular (90°) to

the rim.(See Fig. 5.) If necessary, adjust the position of the bead

breaker.

4. Step away from the bead breaker. (See Fig. 6.)

AME INTERNATIONAL

INSTRUCTION MANUAL

- 4 -