Ameda PENGUIN 사용 설명서 지침 - 페이지 10

{카테고리_이름} Ameda PENGUIN에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ameda PENGUIN 16 페이지. Deluxe nutritional warmers

5. INSPECTING BEFORE OPERATION

Inspect the product for damage. Do not use if damaged.

Call Ameda CustomerCare at 1.877.99.AMEDA (26332).

1. Flip the rear power switch into the 'ON' position.

2. Press On/Off Button to begin.

3. Scroll to the warming mode of interest:

a. Room Temperature/Fridge to Feed

b. Frozen to Feed

c. Thaw

4. Advance by pressing Enter or Select (green check mark)*.

* Note that if a wrong entry was made, you may press the Go Back

selection button to go back a screen.

1. Scroll to choose the container type and size of interest.

2. Press Enter.

3. Only when ready to begin warming the feeding, place the feeding container into the inner

compartment (orange zipper) of the Therma-Liner and gently push it to the bottom. Press

firmly along the entire orange zipper to encompass the container as much as possible. Use care

when removing and re-inserting feeding containers to prevent damage to the interior water

compartment.

4. Place the prepared Therma-Liner in the well with the sealed opening at the top.

5. Press Enter*.

6. The device will begin warming, vibrating, and alternating screens between the profile selected

and elapsed time.

7. When the feeding has been warmed to a range that includes body temperature, the device will

enter Ready to Feed mode.

8. Please remove the feeding from the Therma-Liner and set the Therma-Liner aside until next

use during the shift.

9. Press On/Off to return the Penguin to Standby mode.

* Note that if a wrong entry was made, you may press the

Cancel selection button to go back a screen.