Acer 226HQL 사용자 설명서 - 페이지 19
{카테고리_이름} Acer 226HQL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer 226HQL 28 페이지. User manual
페이지 인쇄
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the VGA video cable to the computer.
c
Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
d
Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
monitor and the other end to the computer's port.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
3
and the line-out port on the computer with the audio cable.
4
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
5
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
9