AKSOTRONIK LC200A 사용자 설명서 - 페이지 8

{카테고리_이름} AKSOTRONIK LC200A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AKSOTRONIK LC200A 8 페이지. Handheld inductance capacitance meter

corresponding frequency will be displayed.

4. Note:

1. Please reset to "0" before testing a capacitance or an inductance,

or errors may be appeared. Even if "0" displayed before

measuring, resetting to "0" is needed.

2. At the time of resetting to "0", when"CALCULATING...OK"

appeared, please keep pressing for 2 to 3 seconds, and the

parameter written to "<DATA SAVED>" will be prompted, then

release.

3. Resetting to "0" is forbidden as components are being measured.

If you do it, please shut down immediately and restart, then reset

to "0".

4. The time of measuring a big capacitance (above 10mF) may be

more than one second, and it needs seven to eight seconds to

get the measured value of the capacitance (100mF).

5. Forbid to measure a capacitance which is not discharged,

otherwise it may damage the mainframe.

5. Package content

1. A LC200A L/C Meter

2. A mini USB Cable or DC5V adaptor

LC200A Handheld L/C Meter