Coalesse SW 1 매뉴얼 - 페이지 11
{카테고리_이름} Coalesse SW 1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse SW 1 11 페이지. Replacement of knit and fabric components
Coalesse SW 1에 대해서도 마찬가지입니다: 고객 서비스 지침 (7 페이지)
페이지 인쇄
TABLET INSTALLATION
1.
If you are installing a tablet, pull slides out from
tablet until fully extended (1a). Place tablet onto
tablet slide assembly (1b). Align slide with pilot hole
area underneath substructure, tighten (2) set screws
on tablet slide assembly, (1c). Put assembly into
position (1d) and secure using three (3) screws per
slide (1e). Level tablet on table and tighten screws (1f).
2.
Install grommets by placing into opening (2a) (if
any) and twisting to the right until it stops (2b). Orient
barriers so the logo aligns with the width of the table
(2c).
1b
1c
TABLET
1a
SLIDE
TABLET
SLIDE ASSEMBLY
1f
TIGHTEN
SCREW
2a
GROMMET
Underside of Substructure
1d
2b
2c
1e
Page 11 of 11
939500440 Rev E
BARRIER