Coalesse SW 1 Table 매뉴얼 - 페이지 4
{카테고리_이름} Coalesse SW 1 Table에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse SW 1 Table 11 페이지.
페이지 인쇄
NOTE: This page applies to the large "X"
base, "V" base and inline base.
NOTE: It is recommended that you use two
people to assemble the base assembly.
3.
Insert threaded rod into upper cone.
NOTE: Make sure tab in upper cone
aligns with threaded rod ring notch.
4.
Place column over threaded rod.
NOTE: Tabs and notches in upper cone
and column only allow one correct
position.
5.
Place onto base.
NOTE: Tabs and notches in base and
column only allow one correct position.
6.
Hand tighten lock nut on threaded rod loosely.
After ALL tabs and notches are aligned, fully
tighten lock nut to a torque of 30 ft-lbs.
3
4
5
6
939500440 Rev E
Page 4 of 11