Coalesse SW 1 Table 매뉴얼 - 페이지 7

{카테고리_이름} Coalesse SW 1 Table에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse SW 1 Table 11 페이지.

Use a 3-3/4" high wood block

under center connector for support.

One table half has large domino

and dowel holes, and the other half

has small holes. Install the half with

the smaller holes first, then insert the

dominoes and dowels into the holes.

Note: for 3 piece tops, start with

center section first.

Slide the table half into position

so that the pilot holes are seen

through holes in cones.

a) Install screws in piloted holes

with oval openings first, then b)

install screws into round holes.

Caution: Use an extra person as a

spotter that holds the top while

another fastens screws.

NOTE: Care must be taken to NOT lift the table

halves by the top surface. Table halves must be

lifted by the sub-structure.

NOTE: Install the half with

the smaller holes first.

DOMINO

THREE-PIECE TOP

(start with center section)

DOWEL

OVAL OPENING

ROUND HOLES

3-3/4"

Page 7 of 11

939500440 Rev E