aero pure ABF110DHG5 Series 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} aero pure ABF110DHG5 Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aero pure ABF110DHG5 Series 15 페이지. Bath fan
aero pure ABF110DHG5 Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (15 페이지), 설치 지침 매뉴얼 (15 페이지)
페이지 인쇄
INSTALLATION I (NEW CONSTRUCTION) CONTINUED
1.
Bend down 8 tabs for positioning as (Fig.2.a) and
unfold the bracket assembly as (Fig.2.b).
2.
Fix one side of the bracket assembly to the joists by
drilling 2 tapping screws (ST4x20) which have been
fixed on it. (Fig.3）
3.
Adjust the length of bracket assembly as the
spacing between joists, and install to joist by drilling
the other 2 tapping screws which have been fixed
on the other side. Adjust the active part of bracket
assembly to the proper position. (Fig.3）
4.
Place the adaptor on the bracket assembly as
indicated position, and install it by using 2
self-drilling screws (ST4X30). (Fig.4)
5.
Push the fan body upwards until the fan body is
stopped by the buckle on the adapter and secure
the fan body by using the remaining 3 self-drilling
screws (ST4X30). (Fig.5)
CAUTION:
！
Hold the fan body to prevent falling before fixing
the screws.
8
Active part
Joist
2 Screws
(ST4X30)
Unit: inches (mm)
Screws
(ST4X20)
Fig.3
Position
of adaptor
Fig.4
Buckle
Fan body
3 Screws
(ST4x30)
Fig.5