Acer AL 1916W 사용자 설명서 - 페이지 8

{카테고리_이름} Acer AL 1916W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AL 1916W 10 페이지. Lcd display
Acer AL 1916W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

Attachment

Power LED does

not light

Icon off

Color Default

Instability or Ripple

Image Offset or

wrong Size

The product provides the latest VESA plug and play function to prevent complicated

and time-consuming installation procedures. The plug and play function allows your

computer system to identify the LCD display easily and set up the functions of the

LCD display automatically.

The LCD display transfers the Extended Display Identification Data (EDID) to your

computer system via the Display Data Channel (DDC), so that your computer can

use the self-setting function of the LCD display.

The LCD display has a built-in Power Control System (Power Saver).

When the LCD display is not operated during a certain time, the Power Control

System will brings the LCD display into low voltage status automatically to save

power. Move the mouse slightly or press any key to return to the normal operation.

The Power Saver function can only be operated by the display card of the computer

system. You can set up this function from your computer.

The LCD display is compatible with EPAENERGY STAR NÜTEK when used with

VESA DPMS.

To save power and extend the life of the product, turn off the LCD display power

supply when it is not used or when remaining idle for a long time.

Check that the power switch is turned on.

Make sure that the power cable is connected.

Check that the power switch is turned on.

Make that the power cable is connected.

Ensure that the signal cable is inserted in the receptacle appropriately.

The Power Saver may turn off the display automatically during the operation. Make

sure that the display is restored when you press any key from the keyboard.

Refer to "Color Temperature Adjustment" to adjust RGB color or select color

temperatures.

Remove the electronic equipment in the vicinity that may cause EMI interference.

Check the signal cable of the display and ensure that no pin is bent.

Press the auto adjustment button to optimize the screen automatically.

Set up the reference position.