Canon 1238P 빠른 설정 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Canon 1238P에 대한 빠른 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 1238P 32 페이지.

For details

"Setting Up Using the Setup Guide" in the User's Guide

Take note of the SSID and network key.

• Check the label on the router.

• The setting operation is easier if the router is

provided with a WPS mark.

Set the access point and network key

according to the screen below.

1. Select <OK>.

2. Select <SSID Settings>.

3. Select <Select Access Point>.

4. Select the access point (SSID), and select

<Next>.

5. Select <OK>.

6. Enter a network key, and select <Apply>.

7. Select <Yes>.

• Wait until message <Connected.> is

displayed.

8. Select <Close>.

• The IP address will be automatically

configured in a few minutes.

Install the driver and software.

P.6 "Installing the software"

Now you are finished with the

configuration of the initial settings.

User's Guide

To connect via wired LAN

The machine does not come with a LAN cable.

Please have one ready, if necessary.

Make sure that the computer is connected to a

router properly.

Check the network settings on the computer.

Connect the LAN cable.

• After connecting the cable, wait a few

minutes (until the IP address is set

automatically).

• If a static IP address has been set on the

computer, set the machine's IP address

manually.

Install the driver and software.

P.6 "Installing the software"

Now you are finished with the

configuration of the initial settings.

Quick Setup