Canon 475D - i Color Inkjet Printer 인쇄 매뉴얼 - 페이지 23
{카테고리_이름} Canon 475D - i Color Inkjet Printer에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 475D - i Color Inkjet Printer 44 페이지. Bubble jet printer
Canon 475D - i Color Inkjet Printer에 대해서도 마찬가지입니다: 설정 지침 (2 페이지), 인쇄 매뉴얼 (4 페이지), 직접 인쇄 매뉴얼 (41 페이지)
페이지 인쇄
Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can be set up as the memory card drive of the computer.
Important
To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer and a Memory Card Utility
(Windows) or BJ Utility (Macintosh) must have been installed in the
computer. If the utility is not installed, install it following the installation
procedure explained in the Quick Start Guide.
When Read/write mode
done.
After you are finished with using the card slot as a memory card drive for
your computer, be sure to select Read-only mode
W
1
Ensure that the printer and the computer are turned on.
2
Open the USB memory card setup window.
(1) Ensure that no memory card is inserted in the card slot. If a memory card is
inserted in the card slot, remove it. See "Removing a Memory Card" on page 10.
(2) Select All Programs
All Programs (or Program
All Programs
All Programs
Utilities, Memory Card Utility
Utilities
Utilities
Utilities
The USB Memory Card Settings
USB Memory Card Settings window appears.
USB Memory Card Settings
USB Memory Card Settings
3
Specify the read/write attribute.
(1) Click Next
Next.
Next
Next
The Read/write attribute setting
Read/write attribute setting window appears.
Read/write attribute setting
Read/write attribute setting
Read/write mode is selected, neither printing nor maintenance can be
Read/write mode
Read/write mode
Program) from the Start
Program
Program
Memory Card Utility, and then USB Memory Card Settings
Memory Card Utility
Memory Card Utility
Read-only mode
Read-only mode again.
Read-only mode
Start menu. Next, select Canon
Start
Start
USB Memory Card Settings
USB Memory Card Settings
USB Memory Card Settings.
(2) Specify the read/write attribute.
Read-only mode
Read-only mode
Read-only mode
Read-only mode
...The card slot is used only for read.
Be sure to select this mode when printing images.
Read/write mode
Read/write mode
Read/write mode
Read/write mode
...The card slot is used as the memory card drive of
the computer. Image data can be written into the
memory card.
(3) Click Next
Next.
Next
Next
When you have selected Read/write mode
precaution and click Next
Other Useful Functions
Canon
Canon
Canon
Read/write mode, read the
Read/write mode
Read/write mode
Next.
Next
Next
23