Canon 475D - i Color Inkjet Printer 직접 인쇄 매뉴얼 - 페이지 36
{카테고리_이름} Canon 475D - i Color Inkjet Printer에 대한 직접 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 475D - i Color Inkjet Printer 41 페이지. Bubble jet printer
Canon 475D - i Color Inkjet Printer에 대해서도 마찬가지입니다: 설정 지침 (2 페이지), 인쇄 매뉴얼 (44 페이지), 인쇄 매뉴얼 (4 페이지)
페이지 인쇄
Troubleshooting
Let's take a look at countermeasures against the troubles that may occur during use of the printer.
Here, we will discuss errors indicated on the operation panel, problems that might occur during direct
printing from the digital camera, and problems that are also likely to occur while using the Photo
Viewer. If you cannot find the symptom corresponding to a certain problem, refer to the User's
Guide.
"An Error Message is Displayed on the Operation Panel" on page 35
"Ink does not come out/ Printing is Blurred/ Colors are Wrong/ White Streaks" on page 37
"Cannot Print Properly from the Digital Camera" on page 38
"An Error Message is Displayed While Using the Photo Viewer" on page 39
An Error Message is Displayed on the Operation Panel
An Error Number is Displayed.
If an error number is displayed on the operation panel, take the corresponding countermeasure described
below.
Error Number/Problem
102
The paper thickness lever
position is wrong.
202
The waste ink tank is
almost full.
301
There is no paper or paper
cannot be fed.
302
Paper jammed.
402
No print head is installed.
Setting the paper thickness lever at the correct position will start
printing.
Pressing the Cancel button will stop printing.
Press the Resume button to recover from the error.
You can print images for a while but you cannot print any more image
when the waste ink tank becomes full. Contact a Canon service
representative.
Load paper and press the Resume button.
Remove the jammed paper, load paper, and press the Resume button.
Install the print head following the instructions given in the Quick Start
Guide.
Error number
Try This
35