Canon 8517A013AA 간소화된 매뉴얼 - 페이지 6

{카테고리_이름} Canon 8517A013AA에 대한 간소화된 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 8517A013AA 14 페이지.

페이지 인쇄

3.2. Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange

User unrecoverable errors

LED

alternate

blinking in

Panel display

orange and

green

2 times

802

4 times

804

6 times

806

7 times

807

8 times

808

9 times

809

Lights in

No display

orange

*1:The error code is stored in the operator / service call history of the EEPROM information.

Service mode

4.1 Service mode function

Function

Service test print

EEPROM information print

EEPROM initialization

Waste ink counter reset

Destination settings

Print head deep cleaning

Operation

panel

display

confirmation

Error Code

5100

Carriage error

5C00

Purge unit error

5400

Internal temperature error

5B00

Waste ink absorber full error

5200

Print head temperature rise

error

6800

EEPROM error

6800

RAM error

Procedures

See "Service mode operation

procedures" below.

See "Service mode operation

procedures" below.

See "Service mode operation

procedures" below.

See "Service mode operation

procedures" below.

See "Service mode operation

procedures" below.

See "Operation panel operation

confirmation procedures" below.

Error

1. Check that no foreign material

is inside the printer.

2. Replace the timing slit strip

film.

3. Replace the purge unit.

4. Replace the logic board ass'y.

1. Check that no foreign material

is inside the printer.

2. Replace the purge unit.

3. Replace the logic board ass'y.

1. Turn the printer off, and after a

short period of time, turn the

printer on again.

2. Replace the logic board ass'y.

1. Replace the ink absorber.

2. Replace the logic board ass'y.

1. Turn the printer off, and after a

short period of time, turn the

printer on again.

2. Replace the print head.

3. Replace the logic board ass'y.

Replace the logic board ass'y.

Set a sheet of A4/LTR- or larger-sized paper.

For print sample, see page 9

Set a sheet of A4/LTR- or larger-sized paper.

For print sample, see page 10.

The following items are not initialized:

- USB serial number

- Destination settings (Japan / Overseas)

- Cleaning flag on arrival

- Waste ink counter

Both the main and the borderless print waste

ink counters are reset at the same time.

Overseas:

i450

Japan:

PIXUS 450i

Cleans black and color, simultaneously.

Confirm the operations of operation panel

display and operation buttons. Perform the

confirmation at operation panel replacement.

Solution

Remarks