Aktakom ACM-2348 작동 지침 - 페이지 12

{카테고리_이름} Aktakom ACM-2348에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ACM-2348 12 페이지. Dc+ac trms watt clamp meter

The backlight function illuminates the display and is used

when the ambient light to too low to permit viewing of the

displayed readings. Press the

second to turn the backlight on and press the button a

second time to turn the backlight off.

Manual Ranging

The meter turns on in the autoranging mode. Press the

Range button to go to manual ranging. Each press of the

range button will step to the next range as indicated by the

units and decimal point location. Press and hold the Range

button for two seconds to return to autoranging. Manual

ranging does not function in the AC/DC Current ,Watt, Diode

and Continuity check functions

1. Remove the one rear Phillips head screw

2. Open the battery compartment

3. Replace the Requires one "9V" battery (NEDA1604,

6F22 006P)

4. Re-assemble the meter

(HOLD) button for one