Canon 8582A001 - i 80 Color Inkjet Printer 설정 지침
{카테고리_이름} Canon 8582A001 - i 80 Color Inkjet Printer에 대한 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 8582A001 - i 80 Color Inkjet Printer 2 페이지. Canon i80: setup instruction
페이지 인쇄1
Unpack the Printer
1
Carefully remove all items from the box.
i80 Series Printer
Power Cord
AC Adapter
i80 Series Print Head
BCI-15 Color
Ink Tank
BCI-15 Black
Ink Tank
Documentation
and Software Kit
2
Prepare the Printer
1
Remove the shipping materials from
the printer.
Plug the power cord into the AC adapter.
2
Connect the DC plug to the printer. Plug
the power cord into a power outlet.
AC Adapter
DC Plug
Power Cord
Serial Number
Location
3
Lift open the paper rest and TURN THE
PRINTER ON. The printer will initialize.
Paper Rest
Paper Output Slot Cover
IMPORTANT: Do not open the
cover before the printer has
finished initializing. Wait until the
POWER lamp remains fully lit.
4
After the printer finishes initializing,
open the print head cover.
Paper Rest
Print Head
Cover
Start Here
Easy Setup Instructions
3
Install the Print Head
1
Remove the print head from its package.
Tear at Notch
2
Remove the protective cap from
the print head.
Nozzles
NOTE: Do not touch the print head nozzles.
3
Press in on the lock button and lift the
gray lock lever.
4
Place the print head into the holder, by
aligning the
mark with the
mark.
5
Lower the lock lever until it clicks into place.
Click
4
Install the Ink Tanks
1
Remove the BCI-15 Black Ink Tank
from its package.
You MUST remove the protective cap.
2
3
Insert the Black Ink Tank into the back slot.
4
Press on the
area until the ink tank
clicks into place.
Click
5
Using the procedure above, insert the Color
Ink Tank into the front slot.
6
Close the print head cover and move the
paper thickness lever to the right.
Print Head
Cover
Paper Thickness
Lever
NOTE: The printer will perform a print head
cleaning after the cover is closed. Wait until
the process is complete before proceeding.
i80
Series
Color Bubble Jet Printer
5
Connect Your Printer
and Load Paper
TURN THE PRINTER OFF.
1
IMPORTANT: Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Connect the one end of the USB
2
cable to the computer, the other
to the printer.
USB
connection
USB
port
USB
Plug
DC
Plug
Slide the paper guide to the left.
3
Load a sheet of blank paper in the
paper rest. Slide the guide toward
the left edge of the paper.
Paper
Guide
Continue with Step 6 on side two.