Canon 900D - i Color Inkjet Printer 인쇄 매뉴얼 - 페이지 27
{카테고리_이름} Canon 900D - i Color Inkjet Printer에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 900D - i Color Inkjet Printer 48 페이지. Bubble jet printer direct printing guide
Canon 900D - i Color Inkjet Printer에 대해서도 마찬가지입니다: 설정 지침 (2 페이지), 인쇄 매뉴얼 (4 페이지), 인쇄 매뉴얼 (50 페이지), 빠른 시작 매뉴얼 (29 페이지), 인쇄 매뉴얼 (30 페이지)
페이지 인쇄
4 4 4 4
Start printing using the print function of the digital camera.
The message of "Digital camera connected" is displayed on the printer LCD.
(1) Display the image you want to print in the Replay mode.
If the camera will not change to the Replay mode, refer to your digital camera user's manual's
instructions for changing the camera to the Replay mode.
will display on the LCD display of the digital camera when the printer is correctly connected.
(2) Press the SET button to display the Print menu.
(3) Select Style and specify the paper size, Bordered or Borderless printing, and date printing On
or Off.
(4) After specifying the style, specify a number of copies, select Print and then press the SET
button.
For the digital camera operation and troubleshooting, refer to your digital camera manual. For print
error message, refer to "Cannot Print Properly from the Digital Camera" on page 45.
For the digital video camcorder operation, print error messages, and troubleshooting, refer to your
digital video camcorder manual.
You can make the following prints directly from a digital camera:
- A standard print from the image displayed in the single display mode or in the index display
mode.
- Specified numbers of images, or an index print using the DPOF function.
* Images other than Exif may not be index printed.
- The images taken with an Exif 2.2 compatible digital camera will be adjusted by using the Photo
Optimizer PRO function.
- If date printing is set on the digital camera, the date of shooting will be printed (excluding the
index print).
- Images will be scaled automatically according to the size of the media set on the digital camera.
The digital camera does not support the following functions:
- Print quality setting
- Maintenance
* The print head cannot be aligned through the digital camera. To align the print head, use the
operation panel of the printer.
To disconnect the cable connected between the digital camera and printer, follow the procedure
below:
1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera. When disconnecting the cable, be sure to hold the
connector by its sides.
26