Canon 9319A001AA 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Canon 9319A001AA에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 9319A001AA 22 페이지. Service manual

페이지 인쇄

1. Service Manual

3. ERROR DISPLAY

Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.

3-1. Operator Call Error (LED Blinking in Orange)

LED

blinking

2 times

Paper out

3 times

Paper jam

4 times

Ink tank not installed

5 times

Print head not installed or failure has

occurred in the print head.

(Non-supported print head (see page 4) is

installed or print head EEPROM data is

abnormal.)

8 times

Waste ink absorber full or platen waste ink

absorber full warning (approx. 95% of the

maximum capacity)

3-2. Service Call Error (LED Blinking in Orange and Green Alternately)

LED

blinking

2 times

Carriage error

3 times

LF error

7 times

Waste ink absorber full or platen waste ink

absorber full

8 times

Print head temperature rise error

9 times

EEPROM error

10 times

No print head detected excepting print head

replacement (during printing)

Error

( 5 / 21 )

Corrective action

Set paper, and press the Resume/Cancel button

to feed the paper.

Remove the jammed paper, and press the

Resume/Cancel button.

Re-install the ink tanks, and close the access

cover.

Install the print head, and close the access cover.

Or, confirm the print head is "QY6-0054-000" and

perform re-installation. If not recovered, with the

print head installed, power the printer off and on.

Pressing the Resume/Cancel button will exit the

error, and enable printing.

Corrective Action

Replace the printer as it has failed.