Aktakom ATK-2011 사용자 설명서 - 페이지 11

{카테고리_이름} Aktakom ATK-2011에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ATK-2011 11 페이지. Clamp meter

XII. BATTERY REPLACEMENT

When the low battery symbol is displayed on the LCD, replace the old batteries with two new batteries.

1. Turn the power off and remove the test leads from the box.

2. Disconnect flexible loop from any conductor.

3. Remove the screw of the battery compartment.

4. Lift and remove the battery compartment.

5. Remove the old batteries.

6. Insert two new 1.5V SUM-3 batteries.

7. Replace the battery compartment and secure the screw.

XIII. MAINTENANCE & CLEANING

1. Always inspect the flexible current probe for any damage. If users find any damage, don't use the flexible current

probe. Return the probe to a qualified person for repair or replacement.

2. Clean the probe assembly with a damp cloth and a mild detergent

Remove the battery if the flexible current probe is not to be used for a long period.

Address of Agent, Distributor, Importer, or Manufacturer