Aktakom AM-1016 사용자 설명서 - 페이지 8

{카테고리_이름} Aktakom AM-1016에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom AM-1016 12 페이지. Network multimeter

3.7.1 Connect the RJ45 test jack to one end of the cable to be tested.

3.7.2 Connect the remote unit to the other end of the cable.

3.7.3 Push TEST button to perform test. Example: The Cable Fault is a SHORT on Pair 1-2 and Pair 3-6,

the LCD status will be as follows:

Pair 1-2, Pair 3-6, Pair 4-5, Pair 7-8, SHIE and SHO will display at the same time.

3.7.4 Push TEST button again, Pair 1-2, Pair 3-6 and SHO will display. Continue to Push TEST button, the

next pairs will display.

4. SPECIFICATIONS

Accuracy is specified for a period one year after calibration and at 18 ⁰C to 28 ⁰C (64⁰F to 82 ⁰F) with

relative humidity to 80 %.

4.1 GENERAL

MAXIMUM VOLTAGE

FUSE PROTECTION

POWER SUPPLY

OPERATING TEMPERATURE

STORAGE TEMPERATURE

DIMENSION

WEIGHT

4.2 VOLTAGE

DC VOLTAGE

Range

Resolution

200m V

0.1mV

1mV

20V

10mV

200V

100mV

1000V

1000V DC or 700V AC

mA: F 200mA/250V 10A: no

9V battery, NEDA 1604 or 6F22

0 ⁰C to 40 ⁰C (32 ⁰F to 104 ⁰F)

-10 ⁰C to 50 ⁰C (14 ⁰F to 122 ⁰F)

185 x 85 x 44 mm

360 g

Accuracy

± 0.8 % of rdg ± 2 digits

± 1.2 % of rdg ± 3 digits