Acer AL1916v 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Acer AL1916v에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AL1916v 47 페이지.

Precautions

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a

wet basement.

Do not place the monitor on an unstable trolley, stand, or table. If the monitor falls, it can injure a person and cause

serious damage to the appliance. Use only a trolley or stand recommended by the manufacturer or sold with the

monitor. If you mount the monitor on a wall or shelf, uses a mounting kit approved by the manufacturer and follow

the kit instructions.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of

the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the

monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do

not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the

type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only

into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an

electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety

purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the

monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock.

Never spill liquids on the monitor.

Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages

and other hazards. Please refer all servicing to qualified service personnel

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured

receptacles marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

Special Notes On LCD Monitors

The following symptoms are normal with LCD monitor and do not indicate a problem.

Notes

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then

turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing

pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image,

when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or

turning off the Power Switch for hours.