Aktakom ATH-2235 사용자 설명서 - 페이지 3

{카테고리_이름} Aktakom ATH-2235에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ATH-2235 8 페이지. Dc power supplies

• Do not place the equipment face-down on any table or work bench

to prevent damaging the controls at the front.

• Opening the equipment and any service and repair work must be

performed by qualified service personal. Repair work should be

performed in the presence of a second person trained to ad

minister first aid, if needed.

• Power supplies do not belong to children hands.

CLEANING THE CABINET

Prior to cleaning the cabinet, withdraw the mains plug from the power

outlet. Clean only with a damp, soft cloth

and a commercially available mild household cleaner. Ensure that no

water gets inside the equipment to prevent possible shorts and

damage to the equipment.

PRODUCT DESCRIPTION

ATH-2235, ATH-2243 and ATH-4012 DC regulated power supplies

have two ways output.

ATH-3231 and ATH-3232 DC regulated power supplies have three

ways output. Of which, two ways are adjustable and one way is fixed.

The two adjustable outputs can also be selected for constant voltage

or constant current, designed in high stability and performance

circuit. In constant voltage state, the output voltage can be arbitrarily

adjusted from 0V on in the nominal range; and in the state of

constant current, the output current can be adjustable from 0A on in

the nominal range. The two outputs can be connected in parallel or

in series, while the master used for voltage or current adjustment.

The maximum output voltage in series is double of independent's,

and the maximum output current in parallel is double too.

There are volt and Amp meters (or 3 digit LED, LCD) for indicating

each of the two outputs with high accuracy.

The one fixed way outputs 5 V voltage. Due to the single chip

integrated regulator, this output has good stability and ripple factor,

and has reliable overload protection to protect the unit against being

damaged whenever overload or short circuit.