aero-naut Marina 사용자 설명서 - 페이지 11
{카테고리_이름} aero-naut Marina에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aero-naut Marina 20 페이지.
페이지 인쇄
61
41
40
41
40
43
42
43
42
23
Bevel the front ends of trims 61,
then glue trims to hull sides
beneath deck.
24
Insert side panels 41 into cockpit and position
cockpit flooor 40 flush with rear end of panels.
Make sure, cockpit floor 40 is resting on formers.
25
Glue together side panels 41 and cockpit
floor 40. Use either CA glue or apply a
fine bead of white glue along the joints.
The white glue will cure to a transparent
film and will not be visible when dry.
Attention: Do not glue the cockpit to
the frames! Use cling film for protection!
44
44
26
Glue separating panels 42 and 43 at right angles onto
markings in cockpit floor.
Insert rear panel 44 into cockpit and glue in place flush with
rear edges of cockpit side panels.
61