Acer AL2202W 매뉴얼 - 페이지 14

{카테고리_이름} Acer AL2202W에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AL2202W 17 페이지.

TROUBLESHOOTING

Before sending your LCD monitor for servicing, please check the troubleshooting list

below to see if you can self-diagnose the problem.

(VGA Mode)

Problems Current Status

LED ON

LED OFF

Picture

LED displays

amber color

Unstable Picture

Display is missing,

center shift, or too

small or too large

Abnormal

in display size

Picture

Remedy

Using OSD, adjust brightness and contrast to

maximum or reset to their default settings.

Check the power switch.

Check if AC power cord is properly connected

to the monitor.

Check if video signal cable is properly

connected at the back of monitor.

Check if the power of computer system is ON.

Check if the specification of graphics adapter

and monitor is in compliance which may be

causing the input signal frequency mismatch.

Using OSD, adjust RESOLUTION, CLOCK,

CLOCK-PHASE, H-POSITION and V-

POSITION with non-standard signals.

Using OSD, in case of missing full-screen image,

please select other resolution or other vertical

refresh timing.

Wait for a few seconds after adjusting the size of

the image before changing or disconnecting the

signal cable or powering OFF the monitor.

E-13

AL2202W