Aktakom ATE-2530 사용자 설명서 - 페이지 2

{카테고리_이름} Aktakom ATE-2530에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ATE-2530 4 페이지.

페이지 인쇄

NOTE: This manual is for three models, which are distinguished by ATE-2530, ATE-2532 and ATE-2533 hereinafter.

1. SAfETy INfOrMATION

Please read the following information carefully before using the meter.

Safety symbols:

Danger/Important Information prompt.

Comply with CE safety standards.

This instrument is compatible with the following standards:

EN61326-1

EN61010-1

EN60825-1

Warning! Do not point laser directly at eye or indirectly off reflective surfaces.

2. PrEcAUTIONS

• After abrupt ambient temperature changes, allow instrument temperature to stabilize for 30 minutes before using

for measurement.

• Avoid operating near strong electromagnetic fields such as arc welders, induction furnaces, etc.

• Do not expose thermometer to excessive ambient temperatures.

• Keep the thermometer clean and avoid getting dust into the detector's optics.

• Do not use solvents to clean the meter.

3. fEATUrE LOcATIONS

1. Sighting Groove

2. Laser orifice

3. Detector orifice

4. Tripod nut

5. Trigger

6. Battery cover

7. LCD

8. Laser button

9. Emissivity reduction button (ATE-2532)

Temperature reduction button (ATE-2533)

10. Mode button

11. Emissivity addition button (ATE-2532)

Temperature addition button (ATE-2533)

12. Backlight button

13. °C/°F button

4. LcD ILLUSTrATION

ATE-2530:

1. Laser-On Indicator

2. Holding indicator

3. The first temperature display

4. Low power indicator

5. Average value indicator

6. MAX/MIN indicator

7. The second temperature display

8. °F temperature unit

9. °C temperature unit

10. Emissivity display

11. Measurement indicator

ATE-2532: (Emissivity adjustable)

1. Laser-On Indicator

2. The first temperature display

3. Average value indicator

4. MAX/MIN indicator

5. Emissivity display

6. The second temperature display

ATE-2530

ATE-2532

Emissivity adjustable

www.tmatlantic.com

ATE-2533

Temperature Alarming