Acer AL2623W 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Acer AL2623W에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AL2623W 31 페이지.

Acer

3.9 Bumping Test

3.9.1 Test mode: 1920x1200 @ 60 Hz;

3.9.2 Test pattern: pattern #1 of crosshatch (GENERAL-1)

3.9.3 To shock LCD monitor lightly at the center of rear cover and edges with 1~2kg/cm2 force for

three times, no abnormal phenomenon is found on panel screen.

DISPLAY CHECK

4.1 Panel Flicker Check

Connect LCD monitor to PC, set LCD monitor to be timing of 1680x1050 @ 60 Hz, adjust brightness to

be default value (brightness at maximum), execute "Auto" function, and then check picture of shut

down under windows XP operating system, or flicker-pattern of pixel on-off. It should be that no flicker

be found on panel screen.

4.2 Panel Defect Inspection

This item should follow IIS

4.2.1 Test mode: 1920x1200 @ 60 Hz

4.2.2 Test pattern: Crosshatch/Full white/Red/Green/Blue/Black/16 color bar/64 gray bars

4.2.3 Display quality must be (according to DIN 13406-2 pixel fault class II)

Bright dot defect

Dark dot defect

Total bright and dark dots

Bright Dots – 2 Adjacent B

Bright Dots – 3 or more Adjacent

Black Dots – 2 Adjacent B

Black Dots – 3 or more Adjacent

Distance between defect dots

Distance between Dark dots

Note 1: Dot defect is defined as the defective area is not larger than 50% of the dot area. Bright Dot is

defined 5% transmission ND filter.

Note 2: Light Leakage: There shall not be visible light around the customer's bezel after assembly in

normal View angle.

Defect Type

Specification

≤ 3pcs

≤ 4pcs

≤ 5pcs

N ≤ 1 pair

N ≤ 0 pair

N ≤ 1 pair

N ≤ 0 pair

L ≥ 15 mm

Service Manual

Major

Minor

․