Acer AL511 사용자 설명서 - 페이지 5

{카테고리_이름} Acer AL511에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AL511 17 페이지. 15"
Acer AL511에 대해서도 마찬가지입니다: 매뉴얼 (24 페이지)

Detaching LCD Monitor from Its Stand

1. Unscrew screws of the hinge bracket

2. Remove the stand from LCD monitor

(See fig. 1-3)

Before installing to mounting device, please refer

to Fig.1-3.

The rear of this LCD display has four integrated

4 mm, 0.7 pitches threaded nuts, as well as four

5 mm access holes in the plastic covering as

illustrated in Figure 1-4. These specifications

meet the VESA Flat Panel Monitor Physical

Mounting Interface Standard (paragraphs 2.1

and 2.1.3, version 1, dated 13 November 1997).

1. Power off your computer.

2. Connect one end of the signal cable to the

LCD Monitor's VGA port. (See Fig. 1-5)

3. Connect the other end of the signal cable to

the VGA port on your PC.

4. Make sure both connections are secure.

Attention

This device must be connected to an off-the-shelf video cable in order to comply with FCC

regulations. A ferrite-core interface cable is included in the LCD Monitor package.

This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is

Figure 1-4

Figure 1-5

Figure 1-3