Acer Aspire V7 Series 사용자 설명서 - 페이지 27
{카테고리_이름} Acer Aspire V7 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer Aspire V7 Series 36 페이지.
Acer Aspire V7 Series에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (28 페이지)
페이지 인쇄
System
Mode - Standard
Picture
Input
Color
Auto Source
Audio
Wide Mode
Performance
Hot Key Assignment
OSD
DDC/CI
System
HDMI Black Level
Quick Start Mode
Move
Enter
Quick Start Mode
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from VGA IN, HDMI1.4, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
Note: Surround application must set Auto Source is "Off".
6.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and 1:1.
7.
Hotkey Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Low Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Low Blue Light, Over Drive).
8.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9.
HDMI Black level: Select to set HDMI1.4 black level.
10. Quick start mode: Select Off or On. Turn on to speed up boot speed.
HDMI
On
Full
On
X
Normal
Off