Acer B223W - Bdmr - 22" LCD Monitor 사용자 설명서 - 페이지 18
{카테고리_이름} Acer B223W - Bdmr - 22" LCD Monitor에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer B223W - Bdmr - 22" LCD Monitor 30 페이지. Dual-usb-hub audio
Acer B223W - Bdmr - 22" LCD Monitor에 대해서도 마찬가지입니다: 브로셔 및 사양 (5 페이지), 사용자 설명서 (30 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (30 페이지), 서비스 매뉴얼 (48 페이지), 서비스 매뉴얼 (49 페이지)
페이지 인쇄
4
Connecting the power cord
Check first to make sure that the power cord you use is the correct type
•
required for your area.
The monitor has a universal power supply that allows operation in either
•
100/120 V AC or 220/240 V AC voltage area. No user-adjustment is
required.
Plug one end of the power cord to the AC inlet, and plug the other end
•
into an AC outlet.
For units using 120 V AC:
•
Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
For units using 220/240 V AC:
•
Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.
Power saving
The monitor will be switched to "power saving" mode by the control signal
from the display controller, as indicated by the amber-colored power LED.
The power saving mode will be kept until a control signal has been detected or
the keyboard or mouse is activated. The recovery time from "power saving"
mode back to "on" is around 3 seconds.
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol,
the monitor is able to plug-and-play. The DDC is a communication protocol
through which the monitor automatically informs the host system about its
capabilities; for example, supported resolutions and corresponding timing. The
monitor supports the DDC2B standard.
Mode
On
Power saving
LED light
Blue
Amber