페이지 인쇄2.4 Tilt and recline operation(Refer to Fig.9)
2.4.1 Reclining function:
Press the left side small level and pull backward / push forward the back to the comfort
reclining position for the user.
2.4.2 Tilt function:
Press the right side small level and pull backward / push forward the back to the comfort
tilting position for the user.
2.4.4 WARNING!!! Don't operate the reclining function and tilting function at the same
time.
Brake lever
2.5 Anti-tipper operation(Refer to Fig.10)
2.51 Pull the anti-tipper length adjusting washer and
move the rod up or down to adjust the length of the anti-
tiper.
2.6 Push bar operation(Refer to Fig.11)
2.6.1 Release the level and pull up or push down the push
bar to adjust the Push bar height.
2.6.2 When stay tilting position, you can increase the push
bar height for easier push the wheelchair.
LEFT: Reclining lever
Anti-tipper length adjusting washer
Fig. 9
RIGHT: Tilting lever
Fig. 10
Brake lever