Aktobis WDH-C20 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Aktobis WDH-C20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktobis WDH-C20 6 페이지. Mini turbo fan
페이지 인쇄
Instructions for use:
1.
Operational environment
-
The maximum operating temperature should not exceed +40°C !
-
The maximum relative humidity should not exceed 90% !
-
The unit should not be operated at altitudes higher than 1,000 metres above sea level!
2.
Commissioning
2.1. Now insert the mains plug properly into the socket.
2.2. Position the fan so that the air stream flows in
the desired direction after switching on. The
turbo fan can be placed in three positions.
Place it according to your airflow needs:
A)
Air flow horizontal (0°)
B)
Airflow diagonal (45°)
C)
Air flow vertically upwards (90°)
2.3. The fan is switched on by a toggle switch
(ON/OFF) located on the side of the unit.
O
=
OFF
I
=
ON
3.
Maintenance, Cleaning & Storage
Please always disconnect the mains plug first and allow the fan to run down completely
before carrying out any cleaning activities on your appliance !
3.1. maintenance:
A professional should treat the fan shaft with lubricating oil approx. every 1,500 operating
hours to ensure optimum operation and a long service life of the fan.
3.2 Cleaning:
-
Use a soft and damp cloth to clean the outside of the unit.
-
Only use mild cleaning agents to clean your blower.
-
Please ensure that water does not get into the interior of the unit or the electrical
control box at any time !
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: [email protected]