Aktobis WDH-SHT30 운영 매뉴얼 - 페이지 3

{카테고리_이름} Aktobis WDH-SHT30에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktobis WDH-SHT30 5 페이지.

Instructions for use:

Operational environment

The maximum operating temperature should not exceed +40°C !

The maximum relative humidity should not exceed 90% !

The unit should not be operated at altitudes higher than 1,000 metres above sea level

The unit was developed exclusively for indoor use and not for outdoor use !

Commissioning

2.1. Insert the mains plug properly into the socket.

2.2. Position the axial fan so that the airflow flows in the desired direction after switching

on. Please note that the front (exhaust air) of the axial fan is indicated by the thick side

of the handle. (The mains cable is also located at the front so that the cable is as far

away as possible from the rear intake area).

2.3. The axial fan is switched on by a toggle switch (ON/OFF), which is located under the

front of the carrying handle. The toggle switch is operated by pressing it sideways

(left/right).

Maintenance, Cleaning & Storage

Please always disconnect the mains plug first and allow the axial fan to drain completely

before carrying out any cleaning activities on your unit !

3.1. maintenance:

A professional should treat the fan shaft with lubricating oil approx. every 1,000 operating

hours to ensure a long service life of the fan.

3.2 Cleaning the housing:

Use a soft and damp cloth to clean the outside of the housing.

Only use mild cleaning agents to clean your axial fan.

Please make sure that no water gets inside your appliance at any time !

3.3 Storage:

We recommend that you repack the unit in its original box for storage.

Store the unit in a dry and sufficiently ventilated place/space.

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de