Aktobis EDH-FGA1263B 운영 매뉴얼 - 페이지 6

{카테고리_이름} Aktobis EDH-FGA1263B에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktobis EDH-FGA1263B 14 페이지.

Functional description of the control panel:

1. ON/OFF switch (ON/OFF)

2. Button for setting the operating mode

3. Button for increasing the room temperature

4. Button for lowering the room temperature

5. Setting the air circulation strength

6. Timer

7. Quiet night mode

8. TiO2/ION button (inactive on this unit type)

Instructions for use:

1. Commissioning

1.1.

Insert the mains plug properly into the socket.

1.2.

Check that the exhaust hose for the hot air is properly installed (see page 5 of the instructions for use).

1.3.

Press the ON/OFF switch. The cooling unit switches on and the default setting Cooling with low air

circulation starts to work. The default target temperature is 24°C. At the same time, the display panel

and signal lights turn on. (Note: The display field for the room temperature can show values from 0°C

to 50°C.) )

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

A. Display panel (temperature etc.)

B. Signal light when automatic mode is activated

C. Signal light when cooling mode is activated

D. Signal light when fan operation is activated

E. Signal light for high air circulation rate

F. Signal light for medium air circulation strength

G. Low air circulation signal light

H. Signal light when timer is activated

I. Signal light when night mode is activated

J. Signal light for TiO2/ION operation (inactive)

K. Signal light - condensation water tank is full