AIPTEK PocketCinema V10 사용자 설명서 매뉴얼 - 페이지 4
{카테고리_이름} AIPTEK PocketCinema V10에 대한 사용자 설명서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIPTEK PocketCinema V10 17 페이지. Lcos projector
AIPTEK PocketCinema V10에 대해서도 마찬가지입니다: 사용 설명서 (2 페이지), 연결 매뉴얼 (2 페이지)
페이지 인쇄
Reading LED indicators
The Power LED is lighting orange when projector is charged.
Only Power LED is lighting green when connected with AC power adapter in standby
mode or complete charged mode.
If all of the LEDs are turned on, projector is in operation mode.
Installing the battery
1. Slide the battery cover open.
2. Place the included Li-Ion battery
into the compartment. Note that
the metallic contacts must be
aligned with the contacts in the
compartment.
3. After the battery is properly
installed, replace the battery cover.
Charging the battery
Please charge the battery at least 3 hours prior to its first use.
1. Connect the cable.
Connect one end of the supplied AC adapter to the
USB port of the projector and the other end to a wall
outlet.
OR
Connect one end of the supplied USB cable to the USB
port of the projector and the other end to a powered
PC. Make sure the projector is powered off.
2. The charging LED turns orange and the charge starts.
3. When the charging is interrupted or the battery pack is
fully charged, the charging LED will turn green.
When using a PC to charge the battery, do not turn on the projector, or the
charge will stop.
Downloaded From projector-manual.com Aiptek Manuals