Air Black Ridge BR180D 매뉴얼 - 페이지 12

{카테고리_이름} Air Black Ridge BR180D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Black Ridge BR180D 20 페이지.

AIR FILTER

The supplied air filter must be used.

Failure to do so may result in irreparable damage and will

void the warranty, Pic. 8

To install:

1. Carefully screw supplied air filter into the threaded hole

on the top of the pump head. This only needs to be done

up by hand. Do not use tools to tighten air filter.

NOTE: Do not OVER TIGHTEN as this may damage the air

filter or cylinder head which will NOT be covered under

warranty.

STARTING AND STOPPING YOUR AIR

COMPRESSOR

Pic. 9

NOTE: Always ensure that you plug your air compressor into

a standard 240V AC power point. Never use an extension

cord as this can lead to a voltage drop which may cause

power loss and over heating. Use a longer air hose if you

need to get closer to your work area.

Always start and stop the compressor using the ON/

OFF button on the Pressure Switch (Pic. 9). Never use

the power point switch to operate the compressor as

this will cause damage and injury may occur. Damage

caused by not using this button will not be covered by

warranty.

To turn your air compressor ON;

Lift up the red ON / OFF button on top of the pressure switch

To turn your air compressor OFF;

Push down the red ON / OFF button on top of the pressure

switch

PIC. 8

PIC. 9

Lift button

up for on

Push button

down for off