American Rotary AD 10 작동 및 설치 매뉴얼 - 페이지 9

{카테고리_이름} American Rotary AD 10에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Rotary AD 10 15 페이지. Adx-cul cnc/heavy duty rotary phase converters

페이지 인쇄

The following diagram shows the electrical schematic for the rotary phase converter:

Firmly snap in the green, yellow/white and red switch

terminals into the pushbutton switch body. (In the image

at right, a clear enclosure cover is used for clarity.)

f. Wire the idler:

240V:

Bolt idler leads 4, 5 & 6 together. DO NOT ground 4, 5, and 6! Insulate this

connection with electrical tape, ceramic electrical tape, or heat shrink

tubing. Connect the ground line to the ground screw inside the motor

conduit box. Inside the phase converter panel box, connect terminal A to

(1,7), terminal B to (2,8) and terminal C to (3,9). Insulate these connections

separately. Hardware for these connections is provided. DO NOT use wire

nuts for ANY idler connections!