Air & Allied Sales MP55AK 사용 설명서 - 페이지 9

{카테고리_이름} Air & Allied Sales MP55AK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Air & Allied Sales MP55AK 11 페이지. Air nipper

●When there is an air leak from an air pin part in the state Where the lever is not pushed

(state which the valve switch opened)

A urethane ball(⑱) needs to be exchanged.

・The exchange method of a urethane ball(⑱)

(1) Intercept an air source of supply.

(2) Remove an air hose from a main part. (Refer to Fig. 1)

(3) Remove screw(⑤) with a minus driver.

(4) Take out a spring (⑳) and urethane ball(⑱).

(5) Put in new urethane ball(⑱).

(6) Put in spring(⑳).

* Direction of a spring (urethane ball side: a smallness side, the screw side : a largeness side)

(7) Screw(⑤) is attached and it completes.

※For safe reservation, please close a valve switch before performing the above-mentioned maintenance.

●When there is an air leak from an air pin part in the state Where the lever is not pushed.

(state which closed the valve switch)

(1) Request repair from a maker through the store for which it asks.

9/11

Air & Allied Sales (Pacific) Pty Ltd