Akura APL2YR2668FD2U 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Akura APL2YR2668FD2U에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura APL2YR2668FD2U 2 페이지.

WATCHING TV (basic operation)

15.

To select a channel either enter the number of the channel using the number buttons on the

remote control or scroll through the channels using the channel CH+/- buttons either on the

remote or on the side of the TV. (Fig 10)

16.

To view analogue TV channels press the SOURCE/INPUT button to display the source

menu. (Fig 11) Using the cursor ▲ / ▼ buttons highlight ATV on the menu and press OK

to select. To view digital TV channels select DTV on this same menu. To use other input

sources, select the Input Source required and press OK.

17.

Adjust the volume to the desired level using the VOL +/- buttons or the ◄ / ►buttons. The

sound can be silenced by pressing the MUTE button on the remote control and a mute

symbol will appear on the screen. Press the MUTE button a second time to restore the

sound.

18.

To switch the TV Off for short periods, press the POWER button. The TV will go into

standby mode and the LED indicator will change to red. If not using the TV for extended

periods disconnect from the Mains Supply to conserve electricity, all settings will be

retained.

Wall Mounting

AKURA accepts no responsibility for any damage to the TV or property, caused by,

incorrect mounting of the wall bracket. To mount the TV on a wall you need to

purchase an adjustable bracket to fit 400 x 200mm centres.

Remove the screws as shown below (Fig 12).

Lift the base from the TV.

Keep the screws safe for remounting the base if required

Mount the wall bracket as described by the manufacturer.

Mount the TV to the wall bracket using 4 x 5 mm x 10 mm set screws. (Do NOT

use longer screws as the internal parts of the TV may be damaged).

For advanced operation of this TV please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide in the Instruction Manual.

If you suspect a fault, please contact the Customer Help Line.

Fig 12

Fig.10

Fig.11