Akura MSD106 사용자 설명서 - 페이지 10

{카테고리_이름} Akura MSD106에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura MSD106 20 페이지. Digital lcd tv with dvbt “freeview” hdmi
Akura MSD106에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (1 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지)

7. Menu Operation.

Connect the TV/DVD to the Mains adaptor and suitable aerial. It is advisable not to connect other

apparatus until you have established that the TV is working correctly. If using the TV for DVBt (Freeview)

viewing the existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the

received stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not

sufficient.

Turn on the power and a Red led will be displayed in the lower right corner.

Press either the Standby button on the remote control or the Power button on the TV.

The led will now turn Green and the screen will light up after approx 5 seconds.

At this stage no stations will be stored.

Basic Tuning

Press the LCD MENU button on the Remote Control. The menu as in Fig

1 will be shown.

Using the ▲/▼ buttons select "AUTOTUNING" and press OK.

Menu Fig 2 will be displayed. If you are in another country other than

UK, use the ►/◄ buttons to select the correct country, otherwise press

▼ to select START and press OK.

Menu fig 3 will be displayed and when tuning is complete the TV will

display the first channel (BBC1) in DVBt mode. All received channels will

be stored, both Analog and Digital.

Fig 3

Fig 1

Fig 2