Bobot DEEP 830 사용 설명서 - 페이지 6

{카테고리_이름} Bobot DEEP 830에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bobot DEEP 830 8 페이지. Smart robot cordless wet and dry vacuum floor washer

OPERATION

I NSTA L L ATION FOR THE ROL L ER BRUSH COV ER

Insert the roller brush cover into the corresponding position at the floor brush as shown in

Fig.12. There is a fastener at the roller brush cover, and the roller brush cover is installed

well in position after you hearing a sound of "click" (see Fig.13) .

Fig.12

OPERATION

CHA RGE THE A PPL IA NCE

1. Insert the adapter of charger into the power outlet (see Fig.14).

2. Put the appliance onto the charger, and the battery indicator turns on and the appliance

enters into the charging condition. A nd the charging is finished after the battery indicator

turns off (see Fig.15).

3. A fter finish charging, unplug the adapter.

Fig.14

Fig.13

OPERATION

OPERATING THE A PPL I A NCE

Before using the appliance, make sure the appliance is charged well.

1. Remove the appliance from the charger and adjust the appliance to the normal working

condition fromthe upright position.

NOTE: The appliance can not work when it is placed upright.

2. Press the Power button, the indicators and the light ring on the control panel illuminate

for a while, then only the Battery indicator illuminates, and the appliance starts to work

and there is water spraying out fromthe appliance. If you want to activate the UV

sterilization function, press the UV button, then the UV indicator turns on.

3. If you want to increase the water amount, press the Water button, and more water will

be sprayed out fromthe appliance, and then you can clean the place where needs more

water for cleaning.

4. The Refill indicator will blink in red if the clean water tank is lack of water, please

refill the clean water tank with pure water in time.

5. The Full indicator will blink in red if the dirty water tank is full, please empty the dirty

water tank in time.

Fig.15