12trace GeoChaser Control 사용자 설명서
{카테고리_이름} 12trace GeoChaser Control에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 12trace GeoChaser Control 8 페이지.
12trace GeoChaser Control에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지), 사용자 설명서 (7 페이지)
페이지 인쇄
User Manual GeoChaser Control
1.Introductie
The GeoChaser Control is a powerful GPS tracking system designed for tracking of vehicles
and reading out driver identification. The device has superior reception sensitivity, fast
positioning and supports four-band GSM frequencies 850/900/1800/1900, the location can
be viewed real-time on your personal 12Trace page or in the mobile App. The GeoChaser
has multiple in/outputs that can be used for monitoring or control of external devices. The
GeoChasers communicate with the GPRS/GSM network and can alert you when crossing a
virtual fencing (Geofence), low back-up battery or low communication credits.
Your GeoChaser uses the Global Positioning System (GPS). The GPS system is
maintained by the U.S. Government. Changes in availability and accuracy of the system
can adversely affect the operation of the GeoChaser. 12Trace cannot take any
responsibility for the reliability, availability and accuracy of the GPS system, as a result of
third parties. In the disclaimer of 12Trace you will find more information.
Tall buildings and metal structures can affect the determination of the position by
GeoChaser.
2. Interface Definitions:
There are 8 wires in the cable of the GeoChaser including the connection for the contact input, digital
input, analog input etc.
8) +12/24 Volt
7) GND
6) I-Button (red wire)
5) I-Button (white wire)
4) Release immobilizer,
green led
3) I-Button , red led
2) Ignition
1) unused
3. GeoChaser activation
To activate the GeoChaser he needs to be
registered.
English V1.0
Page 1 of 8
laatste wijziging: 07-8-2018