Barksdale Dynalco SST7200 설치 및 운영 매뉴얼 - 페이지 3

{카테고리_이름} Barksdale Dynalco SST7200에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Barksdale Dynalco SST7200 19 페이지. Speed switch / transmitter



All equipment doors must be closed and protective covers must be in place

unless qualified personnel are performing maintenance.



Shutdown / alarms should be tested monthly for proper operation (see page 16)



Please see page 18 for CSA specific installation instructions.

This manual covers both models SST7200 and SST7400:

SST7200

SST7400

System Overview

The SST7200 / SST7400 speed switches are DIN rail mountable products designed to

convert rotational speed (RPM) to an industry standard 4 – 20 mA analog output.

Both models will accept a pulsed input from either a 2 or 3-wire speed sensor.

Programming:

The host software allows programming of the SST7200 & SST7400 via a USB connection to

a PC.

Additional Features

•

Repeater Output

0 – 1 mA local meter output

•

0 – 5 VDC / 0 – 10 VDC selectable proportional output

•

Isolated 4 – 20 mA proportional output

How to order

Specify part number as follows:

2 setpoints

SST-7200

SST-7200-I

4 setpoints

SST-7400

SST-7400-I

Speed Switch / Transmitter w/ 4 – 20 mA Output & 2 Relay Trips

Speed Switch / Transmitter w/ 4 – 20 mA Output & 4 Relay Trips

Standard

Isolated RPM Input

Standard

Isolated RPM Input