Euro Towers EURO 500 사용 설명서 - 페이지 5

{카테고리_이름} Euro Towers EURO 500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro Towers EURO 500 6 페이지.

EURO 500 DOUBLE WIDTH ASSEMBLY GUIDE

9. Standing on the platform, add a set of 4

rung frames, ladders run in a continuous

pattern.

13. Fit the toeboard clips to the rung next to the corners

of the platforms and then fit the toeboards as shown.

Note:

Any gap between the platform board and

toeboard must not exceed 25mm.

10. Add diagonal braces continuing the

pattern from the previously fitted braces.

Note:

The odd diagonal brace is fitted to the

side nearest the ladder. Repeat steps until

working height is achieved.

4 rung bases set up the following towers:

1.2m; 3.2m; 5.2m; 7.2m; 9.2m; 11.2m

11. Fit the plain platform followed by the

trapdoor platform 4 rungs above the one you

are standing on. Note:

There must always be

2 rungs clear above any platform so you can

fit safe guardrail braces.

5 rung bases set up the following towers:

1.7m; 3.7m; 5.7m; 7.7m; 9.7m; 11.7m

12. Climb the ladder inside the tower and

sitting through the trapdoor fit 4 horizontal

braces face down onto the 1

and 2

rung

above the platforms to form your guardrails

as shown.

7 rung bases set up the following towers:

2.7m; 4.7m; 6.7m; 8.7m; 10.7m