BobsCNC KL733 매뉴얼 - 페이지 5

{카테고리_이름} BobsCNC KL733에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BobsCNC KL733 18 페이지. X frame assembly
BobsCNC KL733에 대해서도 마찬가지입니다: 조립 설명서 (12 페이지), 시작하기 매뉴얼 (9 페이지), 어셈블리 (20 페이지)

페이지 인쇄
BobsCNC KL733 매뉴얼

Installing the Runner Boards

Hint
Clamp the Runner Boards to the X frame as shown.
Step 1
NOTE: that the top edge should be 1/16" below the KL733 frame
members.
Drill a 5/16" diameter hole into the Runner Board using the holes
Step 2
on the KL733 X frame holes as pilot holes as shown.
The Baseboard on which the Spoilboard is mounted will be
screwed into the Runner Board. We recommend using a
straight piece of 1 x 3 pine 37 1/2 long to construct the
Runner Boards.
Page 5