BarMaid BLE-310 사용 설명서 - 페이지 6

{카테고리_이름} BarMaid BLE-310에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BarMaid BLE-310 9 페이지. 3hp commercial blender

TROUBLESHOOTING

Problem

1. Blender fails to start

2. Stopped

3. Ingredients do not mix properly

Solution

1. Place container properly on the base.

2. Check to ensure controls are clean

and moving freely.

3. Double-check to ensure power cord is

securely plugged into the electric outlet.

4. Check to see if the circuit breaker has

tripped or if the fuse for the electric

outlet has blown.

5. Check the onboard reset switch located

at the rear of the blender base.

1. Check the onboard reset switch located

at the rear of the blender base.

2. Unplug blender and wait 5 minutes.

3. Plug the blender back in and resume

operation.

1. Container is too full.

2. Cutter unit blades are not sharp

enough or are damaged.

3. Solid pieces are bigger than 1"

(25mm) cubes.

4. Check the speed to create a fluid

blend.

5. Check to see if enough liquid has

been added to the ingredients. Mixture

should be fluid and free-running at all

times.