BarMaid GP-3 Mini-CE 매뉴얼 - 페이지 3
{카테고리_이름} BarMaid GP-3 Mini-CE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BarMaid GP-3 Mini-CE 13 페이지. Commercial glassware polishers
페이지 인쇄
ASSEMBLY INSTRUCTIONS
1.
Attach air blower onto the base with screw provided.
2.
Insert short brush onto center post of the base.
3.
Insert remaining brushes onto outer posts.
ON/OFF Button
OPERATING INSTRUCTIONS
Note: Glasses must be washed, rinsed and still damp when inserted into the glass polisher to get best results. Dry glasses
are difficult to polish.
1.
Plug power cord into grounded outlet.
2.
Press ON/OFF button to turn glass polisher ON.
3.
Grasp glass at the base and lower onto center brush, for GP-100 holding glass base stationary or with slight up and
down movement, or for GP-3 Mini holding glass base while twisting the glass, so the center brush dries and polishes
the inside of the glass and outer brushes dry and polish the outside of the glass.
4.
Remove glass from glass polisher.
5.
Press ON/OFF button to turn glass polisher OFF when not in use.
Air Blower
Brushes
Short Brush