BOC Smoothcut Plasma 40 운영 매뉴얼 - 페이지 4

{카테고리_이름} BOC Smoothcut Plasma 40에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BOC Smoothcut Plasma 40 20 페이지.
BOC Smoothcut Plasma 40에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지)

페이지 인쇄

BOC Smoothcut Plasma 40 Operating manual

1.0 Recommended Safety Guidelines

and Precautions

Diagram and safety explanation

Cutting sparks can cause explosion or fire.

Keep flammable materials away from cutting. Do not cut

near flammable materials.

Cutting sparks can cause fires. Have a fire extinguisher

nearby, and have a watchperson ready to use it.

Do not cut on drums or any closed container.

The plasma arc can cause injury and burns.

Turn off power before disassembling torch.

Do not grip material near cutting path.

Wear complete body protection.

Electric shock from torch or wiring can kill.

Wear dry insulating gloves. Do not wear wet or damaged

gloves.

Protect yourself from electric shock by insulating yourself

from work and ground.

Disconnect input plug or power before working on machine.

Breathing cutting fumes can be hazardous to your health.

Keep your head out of fumes.

Use forced ventilation or local exhaust to remove fumes

Use ventilating fan to remove fumes.

Arc rays can burn eyes and injure skin.

Do not remove or paint over (cover) the label.

Some safety precautions BOC

recommends are as follows:

• Repair or replace defective cables immediately.

• Never watch the plasma arc except through

lenses of the correct shade.

• In confined spaces, adequate ventilation

and constant observation are essential.

• Leads and cables should be kept clear

of passageways.

• Keep fire extinguishing equipment at a handy location

in the workshop.

• Keep primary terminals and live parts effectively covered.

• Never strike an electrode on any gas cylinder.

• Never use oxygen for venting containers.

Wear hat and safety glasses.

Use ear protection and button

shirt collar. Use welding helmet

with correct shade of filter.

Wear complete body protection.

Become trained and read the

instructions before working on the

machine or cutting.