Canon 8800F - CanoScan - Flatbed Scanner 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Canon 8800F - CanoScan - Flatbed Scanner에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 8800F - CanoScan - Flatbed Scanner 32 페이지. User guide
Canon 8800F - CanoScan - Flatbed Scanner에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 브로셔 (10 페이지), 사용자 설명서 (2 페이지), 서비스 매뉴얼 (28 페이지)
페이지 인쇄
Preparing the Scanner
Preparing the Scanner
Unlocking the Scanner
1
Peel the shipping tapes off the scanner.
2
Open the document cover and slide the lock switch toward the unlock mark (
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, make sure to slide the lock switch toward the lock
mark (
) to fasten the scanning unit.
Connecting the Scanner
1
Connect the scanner to your computer with the supplied USB cable.
2
Connect the supplied power cord to the AC adapter.
3
Connect the AC adapter to the scanner.
4
Plug the power cord into the electrical outlet.
5
Press (
) to turn the power on.
• Only use the USB cable, AC adapter, and the power cord provided with the scanner. Use of
other cables or adapters may lead to a malfunction.
• Always attach the AC adapter to the scanner before plugging in the power cord to the
electrical outlet. Reversing this order may lead to malfunctions.
• When the scanner is connected to the USB 1.1 port and "HI-SPEED USB Device Plugged into
non-HI-SPEED USB Hub" message appears, ignore the message. The scanner operates in
this condition without problems.
4
Unlock Mark
).