Euro-Pro BIG SHARK EP134 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Euro-Pro BIG SHARK EP134에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro-Pro BIG SHARK EP134 4 페이지. 115v., 60hz., 7.8 amps
Euro-Pro BIG SHARK EP134에 대해서도 마찬가지입니다: 소유자 매뉴얼 (4 페이지)

페이지 인쇄
Euro-Pro BIG SHARK EP134 소유자 매뉴얼
CLEANING & CHANGING THE POST MOTOR FILTER
1. Disconnect from electrical outlet
before cleaning the filter.
2. Filter should be cleaned at least twice
a year or when it becomes visible
solid.
3. Always operate the cleaner with the
filter installed.
4. Do not use a washing machine to
rinse the filter.
5. Do not use a hair dryer to dry it.
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Power cord not firmly plugged
HAND VACUUM
into outlet.
WILL NOT
2.
No power in wall outlet.
OPERATE
3.
Needs servicing.
4.
Thermostat has tripped.
HAND VACUUM
1.
Dust cup s full.
WILL NOT PICK-UP
2.
Unit clogged.
OR SUCTION
3.
HEPA Dust Cup Filter needs
POWER IS WEAK
cleaning or replacing.
1.
Dust cup is full.
DUST ESCAPING
2.
HEPA Dust Cup Filter is not
FROM HAND
installed correctly.
VACUUM
3.
There is a puncture/hole in
HEPA Dust Cup Filter.
HAND VACUUM
HOSE OR
1.
Hose clogged.
BRUSHES WILL
2.
Dust cup is full.
NOT PICK-UP
1.
Push the Filter Cover Lock
to open the filter cover.
2.
Remove the filter from the
grill-filter.
3.
Rinse filter in lukewarm water
and dry the filter completely.
4.
Put the filter into the grill-filter.
5.
A severely solid or clogged filter
should be thoroughly washed
with fresh tepid water. A mild
detergent can be used if required.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2.
Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call 1-800-798-7398.
4.
Turn the unit off and unplug
from outlet.
1.
Allow unit to cool down,
then Restart. Empty dust
cup – (see page 4).
2.
Turn unit off and unplug
from wall outlet. Remove
HEPA Dust Cup Filter and
check for object(s) in air
duct and remove.
3.
Clean or replace HEPA
Dust Cup Filter.
(see page 4)
1.
Empty dust cup.
2.
Review HEPA Dust Cup
Filter instructions.
(see page 4)
3.
Replace HEPA dust cup
filter. (see page 4)
1.
Remove hose and/or
bushes. Remove obstruction
from hose.
2.
Empty and clean dust cup.
5
GETTING TO KNOW YOUR BIG SHARK
9
11
7
10
13
1. Push to Open Dust Cup (Container)
2. On/Off Power Switch
3. Suction Hole
4. Handle
5. Exhaust Cover Lock
6. Exhaust Cover
7. Shoulder Strap

Technical Specifications

Voltage:
115V., 60Hz.
Power:
7.8 Amps, 900 Watts
Debris Screen
12
8
8.
Oval Brush
9.
Holes for Attaching the Shoulder Strap
10.
Dust Cup (Container)
11.
Flexible Hose
12.
Crevice Tool
13.
Hepa Dust Cup Filter
2
HEPA Filter